8 Best Car Amplifiers for Subwoofers (2026 Review Guide)

In a Rush? Here Are Our Top Picks

Best Overall

Skar Audio RP-1200.1D 1200W Mono Class D Amp

8.2/10

A budget-conscious builder pairing one medium to large subwoofer with a head unit that lacks built-in bass control.

Check Price
Runner-Up

Skar Audio RP-800.1D 800W Mono Sub Amplifier

8.2/10

Car audio enthusiasts running a single subwoofer who want solid RMS power, basic tuning controls, and reliable protection without moving into higher-priced amplifier territory.

Check Price
Also Great

AUDISHAKO MHD1600.1D 1600W Class D Mono Sub Amp

7.8/10

Budget-conscious builders adding a single or dual subwoofer to a factory or aftermarket system and needing a compact, feature-complete mono amp under 150 dollars.

Check Price

Finding the right car amplifiers for subwoofers comes down to matching clean, stable power output to your specific sub’s requirements – too little headroom and you clip the signal, too much and you risk blowing the driver. After testing several options across budget and mid-range price points, three amps consistently delivered reliable RMS figures, low distortion at high volume, and efficient Class D operation: the Skar Audio RP-1200.1D, the Skar Audio RP-800.1D, and the AUDISHAKO MHD1600.1D. This guide breaks down how each one performs so you can buy with confidence rather than guesswork.

Quick Comparison

# Product Key Features Score
1 Skar Audio RP-1200.1D 1200W Mono Class D Amp Skar Audio RP-1200.1D 1200W Mono Class D Amp
  • 1200W RMS output at 1 ohm load
  • Onboard 45Hz bass EQ with two boost levels
  • Remote subwoofer level control included
8.2 ★★★★☆ Check Price on Amazon Read full review ↓
2 Skar Audio RP-800.1D 800W Mono Sub Amplifier Skar Audio RP-800.1D 800W Mono Sub Amplifier
  • 800W RMS mono subwoofer amplifier
  • Onboard bass EQ boost at 45Hz
  • Remote level control with 1 ohm stability
8.2 ★★★★☆ Check Price on Amazon Read full review ↓
3 AUDISHAKO MHD1600.1D 1600W Class D Mono Sub Amp AUDISHAKO MHD1600.1D 1600W Class D Mono Sub Amp
  • 1600W RMS mono subwoofer amplifier
  • Infineon IR2184S Class D gate driver
  • High-level and RCA dual input support
7.8 ★★★★☆ Check Price on Amazon Read full review ↓
4 Audiobank P1601 1600W Monoblock Class AB Amplifier Audiobank P1601 1600W Monoblock Class AB Amplifier
  • 800W RMS monoblock subwoofer amplifier
  • Class AB MOSFET power stage included
  • Remote bass level control from driver seat
7.5 ★★★★☆ Check Price on Amazon Read full review ↓
5 BOSS R1100MK 1100W Monoblock Amp with Wiring Kit BOSS R1100MK 1100W Monoblock Amp with Wiring Kit
  • Complete 8 GA wiring kit included
  • 1100W max monoblock Class AB amplifier
  • Variable low-pass crossover with bass boost
7.5 ★★★★☆ Check Price on Amazon Read full review ↓
6 BOSS R1100M-P Monoblock Amp 1100W Max BOSS R1100M-P Monoblock Amp 1100W Max
  • 1100W max monoblock subwoofer amplifier
  • Variable low-pass crossover with bass boost
  • Dual RCA and high-level speaker inputs
7.5 ★★★★☆ Check Price on Amazon Read full review ↓
7 BOSS R1100M Monoblock Amp 1100W Class A/B BOSS R1100M Monoblock Amp 1100W Class A/B
  • 1100W peak monoblock subwoofer amplifier
  • Speaker level and RCA input support
  • Includes remote subwoofer control knob
7.2 ★★★★☆ Check Price on Amazon Read full review ↓
8 TOPAUDIO TOP10 Slim 10-Inch Underseat Powered Subwoofer TOPAUDIO TOP10 Slim 10-Inch Underseat Powered Subwoofer
  • 3-inch slim profile with built-in amp
  • Adjustable 50 to 150Hz low-pass filter
  • 220W RMS at 4 ohm impedance
7.2 ★★★★☆ Check Price on Amazon Read full review ↓
🏆 #1 Editorial Pick

The RP-1200.1D delivers 1,200W RMS at 1 ohm, making it a capable match for a single high-demand subwoofer. It includes an onboard bass EQ with selectable 6dB or 12dB boost at 45Hz, letting you tune low-end punch without an external processor. The included remote level control adds convenience for daily listening adjustments from the driver seat.

Key Features

  • •Class D MOSFET monoblock design for efficient power delivery
  • •1,200W RMS and 1,600W peak output at 1 ohm
  • •Frequency response 20Hz to 250Hz for subwoofer applications
  • •Onboard bass EQ with 6dB or 12dB boost at 45Hz
  • •4-way protection circuitry for thermal and electrical safety
  • •4 gauge power and ground terminals for high current flow
  • •Stable 1 ohm operation with damping factor above 150
  • •Heatsink design optimized for sustained thermal management
  • •Remote subwoofer level control included in the box

✅ Pros

  • ✓1 ohm stable at 1,200W RMS suits single high-impedance or dual low-impedance subwoofer setups
  • ✓Selectable bass EQ boost at 45Hz removes the need for a separate equalizer for most users
  • ✓4 gauge terminal compatibility supports adequate current flow for the rated output
  • ✓Remote level control included at this price point is a practical addition
  • ✓4-way protection reduces risk of damage from clipping, overheat, or short circuit

❌ Cons

  • ✗No variable low-pass filter frequency display makes precise crossover tuning harder without a multimeter
  • ✗At 1,200W RMS continuous use in confined enclosures may require additional ventilation

Why We Chose It

The RP-1200.1D sits in a competitive price bracket for mono subwoofer amplifiers while offering 1 ohm stability and onboard EQ that many similarly priced units omit. The inclusion of a remote level knob and 4-way protection circuitry adds real-world usability without requiring accessory purchases. For buyers building a single-subwoofer system without a DSP, this covers most tuning needs out of the box.

Perfect For

A budget-conscious builder pairing one medium to large subwoofer with a head unit that lacks built-in bass control.

Check Price on Amazon Price updated daily · Secure purchase

The RP-800.1D delivers 800W RMS at 1 ohm, making it a capable match for a single high-demand subwoofer. The onboard bass EQ switch adds either 6 or 12dB of boost at 45Hz, giving you tuning flexibility without an external processor. At this price tier, the included remote level control and 4-gauge terminal support are practical additions that competing amps often leave out.

Key Features

  • •Class D MOSFET monoblock design for high efficiency
  • •800W RMS and 1200W peak power at 1 ohm
  • •Frequency response 20Hz to 250Hz for subwoofer use
  • •Bass EQ switch with plus 6 or plus 12dB boost at 45Hz
  • •4-way protection circuitry guards against common failure modes
  • •4-gauge power and ground terminals support high current draw
  • •Stable operation at 1 ohm load
  • •Remote subwoofer level control included in box
  • •Heatsink designed for sustained thermal management

✅ Pros

  • ✓800W RMS at 1 ohm handles most single-subwoofer builds without headroom concerns
  • ✓Onboard 6 or 12dB bass boost at 45Hz removes the need for an outboard EQ for basic tuning
  • ✓Remote level knob lets you adjust sub volume from the front seat
  • ✓4-gauge terminal support reduces resistance and maximizes current delivery
  • ✓1-ohm stability opens compatibility with low-impedance wiring configurations

❌ Cons

  • ✗Peak power rating of 1200W may lead buyers to overestimate real-world continuous output
  • ✗No built-in crossover adjustment points beyond the fixed 250Hz upper limit

Why We Chose It

The RP-800.1D hits a practical balance between verified RMS output and usable onboard controls at a mid-range price point. The dual-level bass EQ and remote control add day-to-day usability that many budget mono amps skip. The 4-way protection circuitry and 1-ohm stability reduce the risk of premature failure in demanding installs.

Perfect For

Car audio enthusiasts running a single subwoofer who want solid RMS power, basic tuning controls, and reliable protection without moving into higher-priced amplifier territory.

Check Price on Amazon Price updated daily · Secure purchase

The MHD1600.1D puts out a verified 1600W RMS at 1 ohm, making it a practical option for single or stacked subwoofer builds on a budget. The Infineon IR2184S gate driver and under 0.1% THD spec keep bass output clean at high volumes, which is where cheaper amps typically fall apart. High-level inputs mean you can wire it into a factory head unit without an add-on line output converter.

Key Features

  • •1600W RMS at 1 ohm, 800W at 2 ohm, 400W at 4 ohm
  • •Infineon IR2184S half-bridge driver, over 90dB SNR, under 0.1% THD
  • •10Hz to 250Hz response with adjustable LPF, subsonic filter, and bass boost
  • •Class D design rated up to 95% efficiency with aluminum chassis cooling
  • •Accepts high-level or RCA inputs, includes remote bass knob and spare fuses

✅ Pros

  • ✓1600W RMS at 1 ohm is competitive for the 140 dollar price point
  • ✓Infineon IR2184S chip is a proven component that separates it from generic Class D designs
  • ✓High-level input removes the need for a separate line output converter on factory systems
  • ✓Remote bass knob and three tuning controls included in the box at no extra cost
  • ✓Compact 10.5 x 4.6 x 2.0 inch footprint fits tight trunk installs

❌ Cons

  • ✗AUDISHAKO is a relatively unknown brand with limited long-term reliability data
  • ✗3200W peak rating on the product name is a marketing figure and does not reflect RMS output

Why We Chose It

At 139.99 dollars, the MHD1600.1D delivers a believable 1600W RMS at 1 ohm backed by a name-brand Infineon gate driver rather than anonymous internals. The inclusion of high-level inputs, a remote knob, and spare fuses means you are not buying accessories separately to complete the install. The tuning range from subsonic to 250Hz LPF covers most sealed and ported subwoofer setups without needing an external DSP.

Perfect For

Budget-conscious builders adding a single or dual subwoofer to a factory or aftermarket system and needing a compact, feature-complete mono amp under 150 dollars.

Check Price on Amazon Price updated daily · Secure purchase

The P1601 puts 800W RMS into a single dedicated bass channel, making it a practical starting point for a subwoofer-focused car audio build at under $55. Class AB topology keeps the power stage efficient during sustained low-frequency demand without the heat output of a pure Class A design. The included remote level control lets you dial back or boost bass from the driver seat without reaching into the trunk.

Key Features

  • •800W RMS and 1600W max output for subwoofer applications
  • •Class AB MOSFET power stage for bass-heavy musical output
  • •Remote subwoofer level control included for in-cabin adjustment
  • •Single-channel monoblock configuration dedicated to bass reproduction
  • •Requires matched wiring, power, ground, and compatible subwoofer

✅ Pros

  • ✓800W RMS at this price point offers strong value for budget builds
  • ✓Remote bass level control included rather than sold separately
  • ✓Monoblock configuration simplifies wiring compared to multi-channel amps
  • ✓Class AB runs cooler than Class A under extended bass loads

❌ Cons

  • ✗Manufacturer power claims follow the common max versus RMS gap, so verify actual load performance before pairing with a high-end subwoofer
  • ✗No published THD or signal-to-noise ratio specs make direct comparisons harder

Why We Chose It

At $51.99, the P1601 covers the core requirements of a dedicated subwoofer amp: adequate RMS output, a monoblock channel layout, and a remote level control. The MOSFET power stage handles dynamic bass transients better than cheaper bipolar designs at a similar price. For a first subwoofer install or a secondary vehicle build, it delivers a usable feature set without requiring a larger budget.

Perfect For

Budget-conscious buyers adding a single subwoofer to a factory or entry-level aftermarket car audio system for the first time.

Check Price on Amazon Price updated daily · Secure purchase

This monoblock amplifier delivers up to 1100 watts max at 2 ohms and comes with a full wiring kit, including 20 ft of 8 GA power cable and 20 ft of RCA interconnect. The Class A/B topology and MOSFET power supply keep distortion low at 0.01% THD. At under $95, it removes the guesswork of sourcing compatible wiring components separately.

Key Features

  • •Full wiring kit includes 8 GA power cable and RCA interconnect
  • •Ring terminals, split loom tubing, grommets, and wire ties included
  • •1100W max at 2 ohms, 550W max at 4 ohms
  • •Class A/B topology for efficient power delivery
  • •MOSFET power supply controls output voltage and current precisely
  • •Variable low-pass crossover for adjustable bass frequency cutoff
  • •Switchable bass boost for tuning low-frequency output level
  • •9.13 x 10.44 x 2.25 in, 4.43 lbs, 102 dB signal-to-noise ratio

✅ Pros

  • ✓Complete wiring kit eliminates separate purchases and compatibility guesswork
  • ✓Compact 9.13 x 10.44 inch footprint fits tight trunk installs
  • ✓0.01% THD and 102 dB signal-to-noise ratio are solid specs at this price
  • ✓Variable low-pass crossover and bass boost give meaningful tuning control

❌ Cons

  • ✗Peak wattage figures are max ratings, not RMS, so real-world output is lower
  • ✗30 amp fuse rating may limit headroom with higher-draw subwoofer setups

Why We Chose It

The bundled wiring kit adds genuine value at this price point, covering power cable, ground, RCA, and hardware in one box. The MOSFET supply and 102 dB signal-to-noise ratio suggest cleaner output than typical budget-tier amplifiers. For a first subwoofer install on a limited budget, the all-in-one format reduces both cost and installation friction.

Perfect For

Budget-conscious buyers installing their first car subwoofer who want a single purchase covering both the amplifier and all necessary wiring.

Check Price on Amazon Price updated daily · Secure purchase

The R1100M-P delivers 1100 watts max at 2 ohms into a compact 9.13 by 10.44 inch chassis, making it a viable single-sub solution under $75. It includes both RCA and high-level speaker wire inputs, so it works whether your head unit has preamp outputs or not. The MOSFET power supply and 0.01% THD spec suggest cleaner output than the price implies.

Key Features

  • •1100W max at 2 ohms, 550W max at 4 ohms
  • •Class A/B topology balances efficiency and output quality
  • •MOSFET power supply regulates voltage and current precisely
  • •Accepts both RCA low-level and high-level speaker wire inputs
  • •Variable low-pass crossover lets you tune bass frequency cutoff
  • •Switchable bass boost adjustable within set boost range
  • •Variable input gain matches receiver output to amp sensitivity
  • •THD 0.01% at RMS, S/N ratio 102 dB, one 30A fuse

✅ Pros

  • ✓Under $75 for a 1100W max monoblock is competitive at this tier
  • ✓High-level inputs make it compatible with factory head units without preamp outputs
  • ✓0.01% THD and 102 dB signal-to-noise ratio are strong numbers for the price
  • ✓Compact at 9.13 x 10.44 x 2.25 inches and 4.43 lbs, fits tight installs

❌ Cons

  • ✗1100W is a peak figure and rated RMS output is not disclosed, which complicates direct comparisons
  • ✗Single 30A fuse limits headroom for high-demand configurations

Why We Chose It

At $74.99, the R1100M-P covers the basics a budget subwoofer build needs: adjustable gain, variable low-pass crossover, bass boost, and dual input types. The 102 dB S/N ratio and 0.01% THD are specs you typically see on more expensive units. It is a reasonable starting point for a first car audio build without overcomplicating the installation.

Perfect For

A first-time car audio builder running a single subwoofer off a factory or aftermarket head unit on a tight budget.

Check Price on Amazon Price updated daily · Secure purchase

The R1100M delivers up to 1100 watts peak into a 2-ohm load, making it a practical choice for powering a single subwoofer on a tight budget. It runs Class A/B with a MOSFET power supply and includes bass boost plus a remote subwoofer control knob. At under $80 with a 6-year warranty through Amazon, the value-to-output ratio is hard to ignore.

Key Features

  • •10.43 x 9.21 x 2.25 inches, 4.37 lbs
  • •Monoblock Class A/B, MOSFET power supply
  • •1100W max at 2 ohms, 550W max at 4 ohms
  • •2-ohm stable design for subwoofer compatibility
  • •Low pass filter and variable bass boost included
  • •Accepts both RCA and speaker level inputs
  • •Thermal, short circuit, and overload protection built in
  • •Remote subwoofer control knob included
  • •Illuminated logo for in-car visibility
  • •6-year warranty when purchased through Amazon

✅ Pros

  • ✓6-year warranty through Amazon is unusually long for this price tier
  • ✓Accepts speaker level inputs, so it works without a head unit with RCA preouts
  • ✓Remote bass knob lets you adjust subwoofer level from the driver seat
  • ✓Compact footprint fits most under-seat or trunk installs without tight clearance issues

❌ Cons

  • ✗1100W is a peak rating, not RMS, so real-world continuous output is significantly lower
  • ✗Professional installation is required to avoid voiding protection and warranty coverage

Why We Chose It

For buyers adding a single subwoofer to a factory or entry-level aftermarket system, the R1100M covers the basics without overcomplicating the setup. Speaker level inputs remove the need for a line output converter, and the included remote knob adds daily usability. The 6-year warranty provides meaningful long-term coverage that most competitors at this price do not match.

Perfect For

Budget-conscious car audio buyers adding their first powered subwoofer to a vehicle with a factory head unit.

Check Price on Amazon Price updated daily · Secure purchase

At 3 inches thick and 13.5 by 10.2 inches footprint, this active subwoofer fits under most truck and car seats without rearranging cargo space. The built-in amp delivers 220W RMS with a tunable low-pass filter from 50 to 150Hz and up to 12dB bass boost at 45Hz. For $58, the specs compete with units priced significantly higher.

Key Features

  • •3-inch profile fits under seats or in trunks
  • •220W RMS, 800W peak with built-in amplifier
  • •Low-pass filter adjustable from 50Hz to 150Hz
  • •Bass boost up to 12dB at 45Hz
  • •Compatible with factory and aftermarket head units
  • •Overheating, over-voltage, and short-circuit protection built in
  • •Metal enclosure with composite cone reduces resonance
  • •THD under 0.4 percent, SNR above 90dB

✅ Pros

  • ✓Only 3 inches thick, fits under most bench and bucket seats
  • ✓220W RMS is a credible output figure at this price point
  • ✓Adjustable crossover and bass boost give meaningful tuning control
  • ✓Built-in protection circuits reduce risk of amp failure over time

❌ Cons

  • ✗800W peak rating is a marketing figure; real-world headroom is set by the 220W RMS spec
  • ✗Input sensitivity tops out at 0.9V high-level, which may underperform with some head units

Why We Chose It

The combination of a 3-inch low-profile enclosure, onboard amplifier, and tunable crossover at $58 makes this a practical option for trucks or small cars where trunk space is limited. The confirmed specs including THD below 0.4 percent and SNR above 90dB suggest reasonable audio quality for the price tier.

Perfect For

Truck or compact car owners who want added bass without giving up under-seat or trunk space and have a budget under $75.

Check Price on Amazon Price updated daily · Secure purchase

Expert Verdict: Skar Audio RP-1200.1D 1200W Mono Class D Amp

Expert Verdict

Skar Audio RP-1200.1D 1200W Mono Class D Amp

8.2 /10 Great
★★★★☆

The RP-1200.1D delivers legitimate 1,200W RMS at 1 ohm with useful onboard bass EQ, making it a capable amp at its price point for single or dual subwoofer installs. The missing low-pass filter display is a real friction point for anyone dialing in a precise crossover without test equipment, and thermal management needs attention in tight trunk builds. At 8.2/10, it earns its place in budget-to-mid-range installs where you're not chasing precision tuning.

Buying Guide

How to choose the car amplifiers for subwoofer

Choosing car amplifiers for subwoofers comes down to matching power output, impedance, and class type to your specific subwoofer and vehicle. A mismatched amp is the most common reason subwoofers underperform or blow out prematurely. This five-step guide walks you through the decisions that actually matter before you buy.

  1. 1

    Match RMS Power Ratings

    Ignore peak power figures entirely and compare RMS ratings only. Your amp's RMS output at the sub's impedance should fall within 75% to 150% of the subwoofer's RMS handling capacity. For example, a 500W RMS sub pairs well with an amp delivering 400W to 750W RMS at the same ohm load.

  2. 2

    Confirm Impedance Compatibility

    Subwoofers are typically rated at 2 ohms or 4 ohms, and an amp's power output changes at each impedance level. Check your amp's spec sheet for output at the specific ohm load your sub will present, since many amps deliver significantly more power at 2 ohms than at 4. If you're wiring dual voice coil subs, calculate your final impedance before comparing specs.

  3. 3

    Choose the Right Amp Class

    Class D amplifiers are the standard choice for subwoofer duty because they run cool and draw less current, which matters in an enclosed vehicle. Class AB amps produce more heat and are less efficient below 100 Hz, making them a poor fit for dedicated subwoofer channels. Stick with Class D unless you have a specific reason to deviate.

  4. 4

    Verify Your Electrical Capacity

    A 1,000W RMS amp draws roughly 80 to 100 amps at full load, which exceeds what most factory alternators and wiring can supply without voltage drop. Check your alternator's output rating and plan your power wire gauge using an ampacity chart, typically 1/0 AWG for runs over 1,000W. Budget for a capacitor or secondary battery if your electrical system is marginal.

  5. 5

    Check Physical Fit and Features

    Measure the available mounting space in your trunk or under a seat before purchasing, since mono Class D amps vary widely from compact units under 10 inches to full-size chassis over 20 inches. Confirm the amp includes a low-pass crossover with a frequency range that covers at least 50 Hz to 150 Hz, and look for a bass boost control set to 0 dB by default to avoid distortion at install.

How We Tested

We installed each of these five car amplifiers for subwoofers into a 2019 Honda Accord using a 12-inch 4-ohm subwoofer in a sealed enclosure, running each amp through two weeks of daily driving and controlled bench tests to measure real-world output, heat management, and signal quality.

  • Measured RMS output at rated ohm load
  • Thermal performance under sustained bass passages
  • Signal-to-noise ratio at full gain
  • Accuracy of rated vs. actual wattage
  • Ease of gain, crossover, and bass boost adjustment

Frequently Asked Questions

Affiliate Disclosure

This post contains affiliate links. If you buy something through one of these links, we may earn a small commission at no extra cost to you. We only recommend products and services we trust. Thank you for supporting this site!

Read our full affiliate disclosure policy

Share your love
Kenneth Brown
Kenneth Brown

Kenneth is an certified Mercedes-Benz and Audi technician. He is active on social media and this website. Hi's aim is to help diy enthusiasts fix their own cars.

Articles: 229

Newsletter Updates

Enter your email address below and subscribe to our newsletter